상세 컨텐츠

본문 제목

Bunn Automatic Cappacino Machine User Manual

카테고리 없음

by denzencosia1975 2020. 11. 27. 10:57

본문



The adjustable automatic cappuccino system combines steam and milk to create the thickest, longest-lasting foam for your cappuccino. And it’s easy to adjust the levels to prepare a creamy latte. The Eletta automatic espresso machine brews consistently exceptional beverages. Espresso is brewed to the perfect temperature, ensuring you get all. View & download of more than 1495 Bunn PDF user manuals, service manuals, operating guides. Coffee maker user manuals, operating guides & specifications.

A10 Automatic &

A10A Automatic

Supplement to A10 Use & Care

Booklet #10070.0000

INSTALLATION & OPERATION

INTRODUCTION

Bunn automatic cappuccino machine user manual pdf

This equipment will automatically brew a 48 ounce batch of coffee into an awaiting decanter and has a pour-over feature for emergency use. It is only for indoor use on a sturdy counter or shelf.

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“Bunn”) warrants the equipment manufactured by it to be commercially free from defects in material and workmanship existing at the time of manufacture and appearing within one year from the date of installation. This warranty does not apply to any equipment, component or part that was not manufactured by Bunn or that, in Bunn’s judgement, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of Bunn are not authorized to make modifications to this warranty or to make additional warranties that are binding on Bunn. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

The Buyer shall give Bunn prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois, 62708-3227. If requested by Bunn, the Buyer shall ship the defective equipment prepaid to an authorized Bunn service location. If Bunn determines, in its sole discretion, that the equipment does not conform to the warranty, Bunn shall repair the equipment with no charge for parts during the one year warranty period and no charge for labor by a Bunn Authorized Service Representative during the one year warranty period. If Bunn determines that repair is not feasible, Bunn shall, at its sole option, replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AS SPECIFIED HEREIN, TO REPAIR OR, AT BUNN’S SOLE OPTION, REPLACEMENT OR REFUND. Bunn shall not be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

TELEPHONE: (217) 529-6601 FAX: (217) 529-6644

USER NOTICES

The notices on this brewer should be kept in good condition. Replace unreadable or damaged labels.

! WARNING

Fill water tank before turning -on thermostat or connecting appliance to power source.

Use only on a properly protected circuit capable of the rated load. Electrically ground the chassis.

Follow national/local electrical codes.

Bunn Automatic Cappacino Machine User Manual

Do not use near combustibles.

FAILURE TO COMPLY RISKS EQUIPMENT

DAMAGE, FIRE, OR SHOCK HAZARD

READ THE ENTIRE OPERATING MANUAL

BEFORE BUYING OR USING THIS PRODUCT

THIS APPLIANCE IS HEATED WHENEVER

CONNECTED TO A POWER SOURCE

00831.0000F 3/98 © 1988 BUNN-O-MATIC CORPORATION

#00831.0000

This equipment is to be installed to comply with the Basic Plumbing Code of the Building Officials and Code Administrators International, Inc. (BOCA) and the Food Service Sanitation Manual of the Food and Drug Administration (FDA).

#00656.0000

ELECTRICAL REQUIREMENTS

CAUTION - Do not plug-in the brewer until specified in Initial Set-Up.

The A10 Automatic Brewer has an attached cordset and requires 2-wire grounded service rated 120 volts ac, 10 amp, single phase, 60 Hz.

The A10A Automatic Brewer has an IEC 320 connector and matching cordset and requires 2-wire grounded service rated 230 volts ac, 10 amp, single phase, 50-60 Hz. The appropriate cordset connector must be supplied when installing the brewer.

PLUMBING REQUIREMENTS

This brewer must be connected to a cold water system with operating pressure between 20 and 90 psi from a 1/2' or larger supply line. A shut-off valve should be installed in the line before the brewer. Install a regulator in the line when pressure is greater than 90 psi to reduce it to 50 psi. The water inlet fitting is 1/4' flare.

NOTE Bunn-O-Matic recommends 1/4' copper tubing for installations of less than 25 feet and 3/8' for more than 25 feet from the 1/2' water supply line. At least 18 inches of an FDA approved flexible beverage tubing, such as reinforced braided polyethylene or silicone, before the brewer will facilitate movement to clean the countertop. It can be purchased direct from Bunn-O-Matic (part number 00326-0000).

This equipment must be installed to comply with the Basic Plumbing Code of the Building Officials and Code Administrators International, Inc. (BOCA)

and the Food Service Sanitation Manual of the Food and Drug Administration (FDA).

Plumbing Hook-Up

1.Attach the flare fitting from the short piece of tubing on the flow control (supplied) to the water inlet fitting on the left rear side of the brewer.

2.Flush the water line and securely attach it to the flare fitting on the strainer.

3.Turn on the water supply.

INITIAL SET-UP

CAUTION The brewer must be unplugged throughout the initial set-up, except when specified in the instructions.

1.Insert an empty funnel into the funnel rails.

Bunn Automatic Cappuccino Machine User Manual Download

2.Place an empty decanter under the funnel.

3.Pour three pitchers of tap water into the screened area on top of the brewer. Allow approximately two minutes between pitchers for water to flow into the tank. While the third pitcher of water is entering the tank, the tank will fill to capacity and the excess will flow from the sprayhead, out of the funnel, and into the decanter.

4.When the flow of water from the funnel stops, plug-in the brewer and place the heater switch on the left side of the brewer in the “ON” lower position. Wait approximately twenty minutes for the water in the tank to heat to the proper temperature. Some water will drip from the funnel during this time; this is due to expansion and should not occur thereafter.

5.Empty the decanter, return it to the warmer, place the warmer switch in the “ON” (lighted) position, and momentarily press and release the start switch.

6.Place the warmer switch in the “OFF” (unlighted) position after water has stopped flowing from the funnel, and let the water in the tank reheat to the proper temperature.

7.Empty the decanter, place the warmer switch in the “ON” (lighted) position, and momentarily press and release the start switch. Check the water volume in the decanter after water has stopped flowing from the funnel. It should be 48 ounces.

INITIAL SET-UP (CONT.)

8.If not, locate the brew timer near the heater switch on the left side of the brewer, adjust the brew timer dial up-or-down as required and allow the water to reheat. Start, and measure another brew cycle.

9.Repeat step 8 until 48oz water volume is achieved.

10.The brewer is now ready for use in accordance with the coffee brewing instructions.

OPERATING CONTROLS

Warmer Switch

Placing the switch in the unlighted position cuts power to the brew station warmer and stops brewing. Stopping a brew cycle after it has been started will not stop the flow of water into the funnel until the tank syphons down to its proper level. Placing the switch in the lighted position supplies power to the brew station warmer and enables the brew circuit.

Start

Momentarily pressing and releasing this switch starts a brew cycle when the warmer switch is in the lighted position.

NOTE The warmer switch must be in the lighted position to initiate and complete a brew cycle.

Full/Half

Placing this switch in the half position yields approximately 24 ounces.

COFFEE BREWING

1.Insert a BUNN® filter into the funnel.

2.Pour the fresh coffee into the filter and level the bed of grounds by gently shaking.

3.Slide the funnel into the funnel rails.

4.Place an empty decanter under the funnel.

5.Place the warmer switch in the lighted position. Momentarily press and release the start switch.

Bunn Dual Coffee Maker Manual

6.When brewing is completed, simply discard the grounds and filter.

CLEANING

1.The use of a damp cloth rinsed in any mild, non-abrasive, liquid detergent is recommended for cleaning all surfaces on Bunn-O-Matic equipment.

2.Check and clean the sprayhead. The sprayhead holes must always remain open.

3.With the sprayhead removed, insert the deliming spring (provided) all the way into the sprayhead tube. When inserted properly, no more than two inches of spring should be visible. Saw back and forth five or six times.

NOTE – In hard water areas, this may need to be done daily. It will help prevent liming problems in the brewer and takes less than a minute.

REPLACEMENT PARTS

04060.0000 ......

BASE EXTRUSION

04067.0001 ......

SWITCH, LIGHTED ON/OFF 120V (A10)

04040.0004 ......

BREW FUNNEL, BLACK

04039.0000 ......

SWITCH, LIGHTED ON/OFF 240V (A10A)

04069.0003 ......

CONTROL THERMOSTAT ASSY.

21274.0000 ......

SWITCH, START

01716.0000 ......

CORD, POWER 250V 10 AMP, IEC320 (A10A)

04786.0002 ......

SWITCH, VACATION

01637.0000 ......

CORDSET, 16/3HSJO NEMA 5-15P (A10)

05518.0000 ......

SYPHON HUB

04123.0001 ......

COVER, TOP BLACK

04174.0000 ......

TANK HEATER 1000W 240V (A10A)

00658.0000 ......

DECAL, CAUTION DECANTER & FUNNEL

00943.0000 ......

TANK HEATER GASKET

21139.0002 ......

DECAL, FRONT END CAP

00942.0002 ......

TANK HEATER NUT

00831.0000 ......

DECAL, WARNING ELECTRICAL

04144.0000 ......

TANK HEATER, 1000W 120V (A10)

01193.0000 ......

DELIMING SPRING

01932.0000 ......

TANK KEEP WARM HEATER, 34W 240V (A10A)

04124.0001 ......

FLIP LID, BLACK

04100.0000 ......

TANK KEEP WARM HEATER, 40W 120V (A10)

01148.0001 ......

FLOW CONTROL & STRAINER ASSY, .222 GPM

04142.0000 ......

TANK LID

20526.0222 ......

FLOW WASHER, .222 GPM

04844.0000 ......

TANK LID GASKET

04002.1000 ......

FOOT

00960.0001 ......

TANK LID INLET FITTING

21327.0001 ......

FRONT END CAP, BLK

01540.0000 ......

TANK LID INLET FITTING WASHER

04063.0000 ......

HOOD EXTRUSION, LEFT

01201.0000 ......

TANK LID INLET GASKET

04062.0000 ......

HOOD EXTRUSION, RIGHT

04167.0001 ......

THERMAL CUT OFF W/RED LEADS (A10A)

04041.0003 ......

HOT WATER FUNNEL, BLACK

21453.0000 ......

TIMER BOARD SHIELD

04097.0002 ......

POUR-IN BASIN, BLACK AUTO

02620.1042 ......

TIMER, 120V 3-BATCH (A10)

01908.0000 ......

POWER CONNECTOR, IEC320 (A10A)

02620.1043 ......

TIMER, 240V 3 BATCH (A10A)

04016.0001 ......

REAR END CAP, BLK

04065.0000 ......

TRUNK EXTRUSION, LEFT

01975.0000 ......

SOLENOID VALVE 240V (A10A)

04064.0000 ......

TRUNK EXTRUSION, RIGHT

01085.0000 ......

SOLENOID VALVE, 120V (A10)

04012.0007 ......

TRUNK REAR, BLK (A10)

01075.0000 ......

SPRAYEHAD FITTING NUT

04012.0008 ......

TRUNK REAR, BLK (A10A)

04011.0000 ......

SPRAYHEAD PANEL

21214.0000 ......

TUBE ASSY, FILL BASIN

04045.0000 ......

SPRAYHEAD, 5 HOLE PLASTIC

04095.0003 ......

WARMER ASSY W/LEADS, BLK 80W 230V (A10A)

01082.0004 ......

SPRAYHEAD, 5 HOLE STAINLESS STEEL

04095.0002 ......

WARMER ASSY W/LEADS, BLK 80W 120V (A10)

00707.0000 ......

STRAIN RELIEF BUSHING (A10)

04021.0002 ......

WARMER FRAME, BLACK

04052.0000 ......

SWITCH BRACE

04870.0000 ......

WATER PITCHER, 48 OZ

21273.0000 ......

SWITCH, HALF BATCH

SCHEMATIC WIRING DIAGRAM A10 AUTO

L1

SW. &

GREEN

N

LIMIT

LIMIT

SW1

THERMOSTAT

THERMOSTAT

THERMOSTAT

BLK

BLU

BLK

1000W

WHI

WHI

40W

TANK HEATER

WHI

SW2

'KEEP WARM' HEATER

WHI

WHI

80W

WHI

BLK

BLK

LOWER WARMER

SOL

SW3

HALF BATCH OPTION

BLK

GRY

1

WHI

SW4

PNK

2

ORA

BREW 3

WHI/GRN

TAN

TIMER 4

YEL

5

120 VOLTS AC 2 WIRE

10628.0001A 5/92 © 1991 BUNN-O-MATIC CORPORATION

SINGLE PHASE

SCHEMATIC WIRING DIAGRAM A10 A AUTO

L1

SW. &

GRN/YEL

L2

LIMIT

LIMIT

SW1

THERMOSTAT

THERMOSTAT

THERMOSTAT

BLK

BLU

BLK

1000W

RED

WHI

40W

TANK HEATER

WHI

SW2

'KEEP WARM' HEATER

RED

RED

80W

RED

BLK

BLK

LOWER WARMER

SOL

SW3

HALF BATCH OPTION

BLK

GRY

1

RED

SW4

PNK

2

ORA

BREW

3

WHI/GRN

TAN

TIMER 4

YEL

5

230 VOLTS AC 2 WIRE

10627.0001A 5/92 © 1992 BUNN-O-MATIC CORPORATION

SINGLE PHASE

To continue the download you need to go through the captcha:

DATE

Features

12 Cup Automatic Coffee Brewer

Brews 3.8 to 7.5 gallons (14.4 to 28.4 liters) of perfect coffee per hour.

Model is space-saving 8.5' (21.6 cm) wide.

Black decor construction (stainless steel optional).

Hot water faucet and pourover feature on all models.

SplashGard® funnel deflects hot liquids away from the hand.

International electrical configurations available.

Model CWTF15–3T*

Model CWTF15–2

Model CWTF15–1

Shown with decanters

Get access to helpful solutions, how-to guides, owners' manuals, and product specifications for your Level U Headphones from Samsung US Support. Samsung level u headphones user manual 2016. Style & Performance. The Samsung Level U is an ideal choice for high quality music on the go. Ergonomically designed for long term wear, these headphones feature a flexible urethane joint to wear around your neck and stabilizing wing ear gels for in-ear comfort. Aug 23, 2016  Get access to helpful solutions, how-to guides, owners' manuals, and product specifications for your Level U Pro Headphones from Samsung US Support. Samsung Level U Pro EO-BN920 User Manual. Bluetooth stereo headset. (UHQ-BT) feature, you can listen to UHQ audio using the headset. Use the Samsung Level app on the connected mobile device to deactivate the UHQ-BT feature. For more information, refer to the Samsung Level.

Shown with decanters

Shown with decanters

(decanters sold separately)

(decanters sold separately)

(decanters sold separately)

Dimensions: 18.9” H x 8.5” W x 17.8” D

Dimensions: 18.9” H x 8.5” W x 17.8” D

Dimensions: 16.8” H x 8.5” W x 17.8” D

(48cm H x 21.6cm W x 45.2cm D)

(48cm H x 21.6cm W x 45.2cm D)

(42.7cm H x 21.6cm W x 45.2cm D)

For current specification sheets and other information, go to www.bunn.com.

* International models may vary in appearance.

All components within the library are packaged in the 'boost' namespace, or a sub-namespace thereof. Boost is a library which is growing all the time, the home page and the show some of the changes in the last few releases. The boost graph library user guide and reference manual pdf. Developer support. Regular updates.

Bunn Cappuccino Mix

Related Products

Easy Clear® EQ-17-TL

Paper Filter Pack

Product No. : 30200.1000

Product No. : 20115.6000

Dimensions:

Packed per case: 1,000

12716' H x 212' W x 3' D

Dimensions: 414' Base x 234' Sidewall

31.6 cm H x 6.35 cm W x 7.62 cm D

10.8 cm Base x 6.98 cm Sidewall

Easy Pour® black decanter

Product No. : 06100.0201

Quantity: 1 (also packaged in

Easy Clear® ED-17-TL

quantities of 3 & 24)

Product No. : 30201.1001

Easy Pour® orange decanter (for decaf)

Dimensions: 814' H x 2516' Dia.

Product No. : 06101.0201

20.95 cm H x 5.87 cm Dia.

Quantity: 1 (also packaged in

quantities of 3 & 24)

WX1-warmer

Product No. : 06450.6000 One position warmer

WX2-warmer

Product No. : 06310.6000 Two position warmer

Model

Agency Listing

CWTF15

CWTF35

CWT15

E9001.7002B

Patents Apply

01/07 A1.1

Dimensions & Specifications

CANADA

Model

Product #

Volts

Amps

Tank Htr

Total

Capacity

Cubic

Weight

Cord

Watts

Watts

per hour

Ft.3/m3 lbs./kg.

Attached

CWTF15-1*

12950.6031

120

11.5

1150

1250

3.8 gal./14.4 liter

3.9/.12

27 /12.3

Yes

CWTF15-2*

12950.6033

120

11.5

1150

1350

3.8 gal./14.4 liter

3.9/.12

32 /14.5

Yes

CWT15-3T*

12950.6013

120

12.5

1150

1250

3.8 gal./14.4 liter

3.9/.12

33 /14.9

Yes

CWTF15-3T**

12950.6037

120

12.5

1150

1450

3.8 gal./14.4 liter

3.9/.12

33 /14.9

Yes

CWTF15-3T*

12950.6038

120

12.5

1150

1450

3.8 gal./14.4 liter

3.9/.12

33 /14.9

Yes

CWTF35-3T*

12950.6053

120/208

15.1

2625

2975

7.5 gal./28.4 liter

3.9/.12

33 /14.9

No

120/240

17.1

3500

3850

7.5 gal./28.4 liter

3.9/.12

33 /14.9

No

CWTF35-3T***

12950.6066

120/208

15.1

2625

2975

7.5 gal./28.4 liter

3.9/.12

33 /14.9

No

120/240

17.1

3500

3850

7.5 gal./28.4 liter

3.9/.12

33 /14.9

No

CWT35-3T*

12950.6029

120/208

15.1

2625

2975

7.5 gal./28.4 liter

3.9/.12

33 /14.9

No

120/240

17.1

3500

3850

7.5 gal./28.4 liter

3.9/.12

33 /14.9

No

* Black Trunk and Black Plastic Funnel

Fujifilm finepix 2800 zoom user manual download. Fujifilm FinePix S2800HD / S2900HD incorporates a 14-megapixel, 1/2.3-inch CCD sensor and powerful Fujinon 18x (28mm-504mm) wide-angle optical zoom lens that produces crisp high-resolution results throughout the focal range. It also features Instant Zoom, which enables the user to keep their subject in a shot at long distance by offering a wide viewing area around the frame and then immediately cropping to the subject once the photo is taken.The Automatic Scene Recognition (SR Auto Mode) intelligently detects the scene type you are shooting and optimizes the camera's focus, exposure and white balance, so whether you're photographing flowers or a holiday landscape, you will get flawless photos at the press of a button.

**Stainless Trunk and Black Plastic Funnel

***Black Trunk and Stainless Funnel

Brewing capacity: based upon incoming water temp of 60ºF (140ºF rise) per 1/2 gallon brew time of 4 minutes.

Models listed as 120/208V or 120/240V must be connected to 208V or 240V electrical service respectively. Please refer to the installation manual.

Electrical: Model 15 requires 2-wires plus ground service rated 120V, single phase, 60 Hz.

Model 35 requires 3-wires plus ground service rated 120/208 or 120/240V, single phase, 60 Hz. Plumbing: 20-90 psi (138-621 kPa). Machine supplied with14' male flare fitting.

Bunn-O-Matic Corporation of Canada - 280 Industrial Pkwy. S. Aurora, Ontario L4G 3T9 • 905-841-2866 • Fax 905-841-2775 • www.bunn.com

Bunn Coffee Maker Parts Manual

BUNN® practices continuous product research and improvement.We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

All dimensions shown in inches. Bunn Corporation owns all copyrights relating to materials in this publication. Please contact Bunn Corporation to request permission to reproduce any portion of this publication.

To continue the download you need to go through the captcha:

Fully Automatic Cappuccino Machine